Up to now, an individual NEC Class 2 approved power supply was used for every circuit of this kind. This resulted in high costs, required a lot of cabinet space and considerable wiring effort. With Murrelektronik’s NEC Class 2 approved MICOs, you can design NEC Class 2 circuits even faster, in a more compact and cost effective way. MICO’s output meets Class 2 requirements according to UL1310 and NEC article 725.
All you need is a standard power supply (that doesn’t necessarily have to be NEC Class 2 approved) combined with a MICO to easily create two, four or eight separate load circuits with limited energy.
The following cabinet components in these NEC Class 2 circuits don’t require UL approval. This prevents a lot of paperwork. Only 70mm wide for the 4 channel classic and 8 channel basic and 36mm for the 2 channel classic and 4 channel – less panel space, less hardware and less wiring is needed.
MICO offers additional benefits for circuit design with its proven functions including: channel-specific switch off in the event of overload, a visual warning notice, saving of error messages and cascading start of current paths – making it possible to use a smaller power supply. An alarm output can be connected to a PLC or an alarm indicator lamp.
Call Murrelektronik on 0161 728 3133 or email [email protected] for further information
Direct link to MICO in the Murrelektronik online shop:
