Titan Enterprises have been offering in-line flow meters for dispensing liquids such as pure water for nearly 40 years. Today, this type of flow device can fulfil critical roles in measuring the rate of flow and volume of pure water in areas including laboratory water purification dispensers, semiconductor cleaning processes and in a growing number of pharmaceutical applications.
In all these applications, contamination of the pure water must be avoided. Consequently, it is crucial that any flow device is constructed from clean materials that cannot contaminate the fluids being measured.
Affordably priced, Titan’s 800-Series turbine flow meter is designed to give high performance over 6 flow ranges from 0.05 to 15 litres per minute. Its’ totally non-metallic wetted components make this the ideal choice for highly repeatable dispensing (+/- 0.1%) of pure water. The bearings of the 800-Series flow meter are made of sapphire for long life and reliability, the body is moulded from inert PVDF to ensure there is no contamination to any fluid passing through it.
For ultra-pure water dispensing applications – clean bore devices such as the Atrato or Metraflow ultrasonic in-line flow meters are the devices of choice. Both the Atrato and Metraflow have no internal moving parts, relying on patented ultrasonic time of flight measurement to totalize the flow with excellent accuracy over very wide flow ranges (0.002 to 20 litres / minute).
To discuss an optimised flow device for your pure water dispensing application please contact Titan Enterprises on +44-1935-812790 or [email protected]. For further information on the 800-Series turbine flowmeter please visit https://bit.ly/3iW6gVR. For further information on the Atrato and Metraflow ultrasonic flowmeters please visit https://www.flowmeters.co.uk/atrato-ultrasonic-flowmeters/.
High Performance Flowmeters for Measuring Low Flows
Titan Enterprises is a leading international manufacturer of ultrasonic flowmeters capable of measuring very low flow, down to 2 ml/min.
The Atrato range of inline low flow flowmeters from Titan Enterprises use patented ultrasonic technology, which enables it to operate with excellent accuracy over very wide flow ranges (0.002 to 20 litres / minute).
Its rugged, clean bore construction makes the Atrato ideal for almost any low flow application, from research and development, to industrial processes and even metering of chemically challenging liquids.
The ultrasonic sound waves travelling down the Atrato flow tube are symmetrical, and as a result, any changes in a fluid’s velocity profile across the pipe diameter will be averaged out by the signal as it passes from the transmitter to the receiver. As a result, the Atrato gives unmatched performance when metering low flows whether laminar or turbulent, and is also largely immune from viscosity.
The Atrato range of inline low flow ultrasonic flowmeters offer excellent turndown (> 200:1), repeatability (+/- 0.5%), linearity and accuracy of better than +/- 1.0% of reading. Different models are available for measuring fluid flow from -10°C to +110°C and pressures up to 30 bar (435 psi).
Atrato inline low flow ultrasonic flowmeters include a USB interface which permits users to directly monitor the rate and total on their PC while also altering some of the operating parameters, such as the pulse resolution and units.
For further information please visit https://www.flowmeters.co.uk/atrato-ultrasonic-flowmeters/ or contact Titan Enterprises on +44-1935-812790 / [email protected].
