Realising deep space travel with electronic engineering

~ Satellite system will assist research into the biological challenges of space ~

Space exploration relies on innovations in technology. In fact, space shuttles can have up to 2.5 million moving parts. Mankind yearns to venture further into space, but the biological challenges of long term space travel must be understood and overcome before this is attempted. The BAMMsat project is developing a pioneering system that will enable biological research in space to uncover these mysteries, using motor technology supplied by FAULHABER distributor EMS.

The next major milestone in our quest to uncover the mysteries of deep space is a manned mission to Mars, which NASA estimates will be achievable in the 2030s. Space exploration pushes the boundaries of science and technology, as well as the limits of the human body. Before we send astronauts further into space, we must expand our knowledge of the resulting long term effects of microgravity and high radiation on the human body.

Electronic engineering plays a vital role in space exploration and research, contributing to the operation of spacecraft systems, with particular importance in satellites.  Designing electronic systems for space is challenging, as temperature fluctuations and radiation can damage or malfunction equipment. Not to mention systems must be compact and lightweight in order to be feasibly launched.  

The BAMMsat-on-BEXUS project is overcoming these challenges, using electronic and biological engineering to create a high performance system that enables biological research in space, with an ultimate aim to support human spaceflight.

Science in small spaces

The project team is developing a miniaturised lab system that is compatible with 3U CubeSats, a sub-type of miniaturised satellites designed for space research, consisting of three units stacked together.

“Researching the effects of microgravity and radiation in on-ground facilities has technical constraints that can add complexity to data interpretation,” explained Aqeel Shamsul, a PhD student at Cranfield University and head of the project.  “However, in-flight experiments come with their own challenges, often entailing expensive launch missions.

“These factors are limiting research into the effects of environmental space factors on biological systems, therefore impeding progress in deep space travel. We’re combatting this by designing a cheaper way to conduct biological research in space, with a system that can facilitate experiments within remarkably small dimensions.”

The lab system includes a disk with multiple chambers along its edge that contain the isolated biological samples. A motorised system turns the disk to position different chambers opposite microfluidic inlet and outlet openings, which can channel small amounts of fluids without human intervention. The device can then supply food or extract waste from the samples using a fluidic pump.

The disk can also be turned to orientate a chamber in front of a microscope, which can send an image of the sample back to researchers on Earth. Compared to other equivalent systems that have one block containing one sample, the multi-chambered disk system allows numerous experiments with different samples to occur simultaneously.

“As well as using a small organism, light weighting other components of the system was important to ensure the satellite could be viably and economically launched into space,” added Shamsul. “One area where this had to be considered in detail was the motor system used to turn the disk containing sample chambers.”

Motors to match

A high torque was required to turn the disk, but the motor system needed to deliver this power while remaining compact. To achieve this, sole UK supplier of FAULHABER motors, EMS, was brought into the project.

EMS conducted thorough calculations to find a system that would deliver maximum performance in the given space envelope. After careful consideration, a 22 millimetre (mm) diameter brushed motor from the FAULHABER SR series was selected. The motor was paired with an encoder to deliver fine speed control, as well as a planetary gearhead to maximise torque.

FAULHABER systems are renowned for their high power density, packing high performance in a compact package. The small and lightweight motor system ensured minimal weight and bulk was added to the CubeSat. All FAULHABER systems are made in a highly accurate manufacturing process, ensuring supreme reliability. This, paired with their high efficiency, makes them a dependable option to drive a system being sent into space.

To infinity and beyond

The BAMMsat system is planned to be launched into the stratosphere. With the help of the Swedish National Space Agency, German Aerospace Centre (DLR), European Space Agency and their partners, the prototype will be flown using a high-altitude balloon. This will allow the BAMMsat team to test aspects of the system, such as the control system and payload hardware, in a spaceflight-representative environment.

Once the BAMMsat system has been validated for future missions, it could go on to conduct biological research in low Earth orbit (LOE) and deep space, including trips to the International Space Station (ISS).

“The BAMMsat project is a result of impressive collaboration between a number of engineering sectors, incorporating aerospace, biological and mechanical expertise,” said Dave Walsha, sales manager at EMS. “The potential of the system to enable safe long term space travel is sensational.”

The BAMMsat project will help fill the knowledge gap in long term human duration in space. If your next project requires a high performance motor system that meets small space requirements, then get in touch with the EMS team at www.ems-limited.co.uk.